Product ID:HAZE GRAY LATEX, D10167
MSDS Date:12/13/1993
FSC:8010
NIIN:00N073311
MSDS Number: CGTBV

PPG INDUSTRIES INC

1 PPG PL
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 412-434-3131

Info Phone: 412-434-3131

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL 0.1 MG/M3 RDUST(MFR)

ACGIH TLV: 0.1 MG/M3 RDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER; (TAP WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

ETHYLENE GLYCOL (SARA 313) (CERCLA)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-2%

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

2-2-PROPOXY ETHANOL; (DIETHYLENE GLYCOL MONOPROPYL ETHER)

CAS: 6881-94-3

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

PROPIONIC ACID, 2-METHYL-, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

BENZYL ALCOHOL

CAS: 100-51-6

RTECS: DN3150000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

GLYCOL ETHERS

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

RESPIRABLE SILICA/QUARTZ, SO POTNTL HAZ FOR HUMANS

RTECS: 9999999ZZ

INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN

RTECS: 9999999ZZ

INVOLVED IN MFR OF THIS PIGMENT INDICATE NO INCR

RTECS: 9999999ZZ

DIOXIDE DUSTS FROM COATINGS IS VERY LTD. SINCE

RTECS: 9999999ZZ

MAN. THIS PROD CONTAINS ETHYLENE GLYCOL WHICH MAY

RTECS: 9999999ZZ

CAUSE BIRTH DEFECTS IN LAB ANIMALS. NO EVID OF THESE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE CONT:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION
& VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN CONT:MAY CAUSE
SLIGHT IRRIT. DRYNESS, ITCH, CRACKIN G, BURNING, REDNESS & SWELL
ARE CNDTNS ASSOC W/EXCESSIVE CONT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL IF(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
MONOGRAPHS, VOL 68, 1997:GRP 1. NTP 7TH ANNUAL RPT ON CARCINS,
1994:ANTIC TO BE CARCIN.
Effects of Overexposure:HLTH HAZ:INHALED. SANDING & GRINDING DUSTS MAY
BE HARMFUL IF INHALED. VAP GENERATED AT ELEVATED TEMPS IRRITS EYES,
NOSE & THROAT. CHRONIC:AVOID LONG TERM & RPTD CONT. LONG-TERM EXPOS
TO CRYSTALLINE SI LICA/QUARTZ MAY ALSO LEAD TO DISABLING INJURY
KNOWN AS SILICOSIS. THESE EFTS ARE ASSOC W/BRTHG EXCESSIVE AMTS
OF(SUPDAT)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYES:FLUSH IMMED W/PLENTY OF
WATER FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY ARTF RESP & O THER SUPPORTIVE MEASURES AS REQD. NOTE:IF
INGEST, ANY TYPE OF OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMERGENCY ROOM/MD IMMED; HAVE
MSDS INFO AVAILABLE.

Flash Point Method:PMCC
Extinguishing Media:USE NPFA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS
(SUPDAT)
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER NIOSH APPROVED RESP & SKIN EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER A BSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUSTIBLE LIQS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXTURE MAY HAVE HAZARDS OF ALL OF ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
NIOSH APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(SUPDAT)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR PROT CLOTHING INCL IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:IIIB COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO
WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF.
VENT:BELOW STATED LIM & TO REMOVE DECOMP PRODS DURING WELDING/FLAM
E CUTTING. EFTS OF OVEREXP:SILICA DUST.APPLICATION OF THIS PROD IS
NOT EXPECTED TO GENERATE EXCESSIVE AMTS OF (ING 11)

Boiling Pt:B.P. Text:>208F,>98C
Vapor Pres:17
Vapor Density:HVR/AIR
Spec Gravity:1.11
Evaporation Rate & Reference:30 (BUOAC=100)
Solubility in Water:57.1%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF CHEM FAMILY
& ANY SOLVS LISTED IN INGS.
Percent Volatiles by Volume:66.40

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME-CUTTING MAY PRDCE FUMES
INCLUDING: CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT F ACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.